Free Download MicroROS and ESP32 WiFi Controlled Robot Hands-On using ROS2
Last updated 7/2024
Created by Muhammad Luqman
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: Intermediate | Genre: eLearning | Language: English + subtitle | Duration: 75 Lectures ( 6h 52m ) | Size: 3.45 GB
Step-by-step guide to developing a MicroROS Robot using Platformio for ESP32 development. UDPATED
What you'll learn
✓ Mobile Robot ROS integeration
✓ ROS and ESP32 Communication
✓ ROS Serial and Wifi Communication
✓ Programming Robots
Requirements
● N20 DC geared motors with Encoders X2
● Esp-32 S2 Development board X1
● 18650 Cells X2
● Motor Driver ( Mini L298N)
● 3D printer if possible
● Soldering Wires , Soldering Paste , Solder
● Jumper Wires , 5mm nuts and screws
● N20 mini Car Caster Wheel X1
● N20 motor wheels X2
● Slider Button
● Mini 360 Buck converter to 5V
● Lipo Cell Charger Circuit
Description
Course Updated to ROS2 Humble
The current rating is for the old version of the "Building ESP32 MicroROS Bot" course. The new update to projects and the way of explaining is what you are going to love
Course Workflow
Welcome to the MicroROS ESP32 WiFi controlled robot course! If you're passionate about robotics and eager to dive into hands-on hardware and ROS2 projects, this course is perfect for you. We'll guide you step-by-step in building a fully functional robot using the ESP32 and MicroROS with ROS2.
Course Overview
Section 1: Building the Robot
• Assemble your robot from the ground up
• Utilize 3D-printed parts and resources we provide
• Learn about electronic connections and power distribution
Section 2: Basic Programming
• Get started with programming using PlatformIO to control your robot's movements
• Write simple code to drive the robot and navigate basic paths
• Create your custom libraries for motor driving
• Integrate the OLED display into your robot
Section 3: MicroROS Integration
• Integrate MicroROS with your ESP32 robot
• Enhance your robot's capabilities with advanced communication using ROS2
By the end of this course, you'll have a deeper understanding of robotics, from hardware assembly to software integration, and you'll walk away with a robot that you built and programmed yourself. Join us on this exciting journey into the world of robotics!
Hardware Requirements
• ESP32
• N20 DC geared motors with Encoders X2
• 18650 Cells X2
• Jumper Wires , 5mm nuts and screws
• Motor driver ( Mini L298N)
• Solder , Soldering Wires , Soldering Paste , Soldering jumper wires
• N20 motor wheels X2
• N20 mini Car Caster Wheel X1
• Slider Button
• Mini 360 Buck converter to 5V
• Battery Charger Circuit
Software Requirements
• Ubuntu 22.04
• ROS2 humble
• A motivated mind for a huge programming project
Who this course is for
■ Intermediate Robotics Software developers
■ College Students
■ Robotics Enthusiasts
■ Robotics Hobbyists
Homepage
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
