Mastering Microcontroller: STM32-LTDC, LCD-TFT, LVGL (MCU3)
Duration: 7h 54m | .MP4 1280x720, 30 fps(r) | AAC, 44100 Hz, 2ch | 3.57 GB
Genre: eLearning | Language: English
Step by step guide to microcontroller based embedded graphics system , Interfacing, and building graphical UI using LVGL
What you'll learn:
Embedded graphics systems
Interfacing RGB TFT LCD using MIPI DPI and MIPI DBI
Interfacing SPI based TFT-LCD display and programming
STM32 LTDC configuration and programming
STM32 LTDC Layers programming
Running LVGL on simulator and on STM32 microcontroller
Using LVGL objects, widgets , styles , animations, menus,etc
Step by step LVGL UI exercises
Covering three major hardware development boards STM32F439 discovery , STM32F746 discovery and STM32F407+External LCD
Register level step by step programming and demonstration
Requirements:
Basics 'C' or 'C++' programming knowledge
Basic microcontroller knowledge
Description:
In this course, you learn the embedded graphics systems and programming part of it along with using LVGL for creating UI applications.
In the first part of the course, you will learn,
1. Basics of embedded graphics systems
2. how to interface an LCD-TFT display to the microcontroller board.
3. How to use the LTDC peripheral of the STM32 microcontroller,
4. How to communicate between the microcontroller and the TFT display using MIPI DPI and MIPI DBI
5. Bare metal programming
In this part you are going to write all the code, completely from scratch, that is using register-level programming.
In the second part, you will learn,
1. Introduction to LVGL ( an open-source graphics library for microcontrollers)
2. Using LVGL in STM32 projects
3. LVGL widgets and their usage, APIs
4. Create UI application using LVGL
5. Testing LVGL application on PC simulator and different STM32 development boards
6. Student project
In this course I will show you how you can create an embedded graphics application for 3 different boards simultaneously
you can either use the STM32F429 Discovery board or STM32F74x Discovery board or you can use any STM32 board with external TFT LCD interfaced via the SPI interface.
Please read the course description carefully and you may also watch free preview videos before enrolling in this course.
Hardware requirements:
If you want to test the code developed for target hardware, you would need any one of the below-mentioned board
For more information please watch the preview videos above.
1. 32F429IDISCOVERY Discovery kit with STM32F429ZI MCU (Explained in the course)
or
2. 32F746GDISCOVERY Discovery kit (STM32F746NG MCU) (Explained in the course)
or
3. STM32F7508-DK Discovery kit with STM32F750N8 MCU
or
4. STM32F4DISCOVERY Discovery kit with STM32F407VG MCU + External ILI9341 TFT-LCD interfaced via SPI (Explained in the course)
or
5. Any stm32 board + External ILI9341 TFT-LCD interfaced via SPI
6. USB logic analyzer (Optional )
7. Jumper wires if you are using hardware option 4 or 5
Note: LVGL applications can be tested on a PC simulator without the need for any target hardware.
Software requirements:
STM32CUBEIDE
Who this course is for:
Anyone who wants to learn and apply embedded systems programming
Bitte
Anmelden
oder
Registrieren
um Links zu sehen.
Please check out others courses in your favourite language and bookmark them
- - - -
RapidGator
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
