2.94 GB | 13min 50s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English
Files Included :
1 Welcome to WR Training.mp4 (13.08 MB)
1 Course introduction.mp4 (12.48 MB)
2 Before you start this online course.mp4 (16.9 MB)
1 Introduction to HX types.mp4 (32.96 MB)
10 Shell & Tube Heat Exchangers AES - Internal floating head.mp4 (11.73 MB)
11 Air coolers Overview.mp4 (28.29 MB)
12 Air coolers Forced draft Induced draft exchangers.mp4 (10.51 MB)
13 Plate and frame exchangers.mp4 (63.41 MB)
14 Spiral plate exchangers.mp4 (28.63 MB)
15 Plate and fin exchangers.mp4 (13.76 MB)
16 Spiral tube exchangers.mp4 (10.29 MB)
17 Double pipe exchangers.mp4 (8.8 MB)
18 Bayonet exchangers.mp4 (9.26 MB)
19 Jacketed vessels.mp4 (33.91 MB)
2 Various types.mp4 (3.1 MB)
20 Fired heaters overview.mp4 (12.41 MB)
21 Fired heater functions.mp4 (18.29 MB)
22 Description of a fired heater.mp4 (15.35 MB)
23 Before proceeding to the next section.mp4 (2.8 MB)
3 Shell & Tube Heat Exchangers Overview.mp4 (25.49 MB)
4 Shell & Tube Heat Exchangers TEMA types.mp4 (51.55 MB)
5 Shell & Tube Heat Exchangers BEM - Fixed tubesheet.mp4 (13.02 MB)
6 Shell & Tube Heat Exchangers CFU - U-tube.mp4 (16.12 MB)
7 Shell & Tube Heat Exchangers Floating tubesheet.mp4 (11.42 MB)
8 Shell & Tube Heat Exchangers AEP - Outside packed stuffing box.mp4 (17.72 MB)
9 Shell & Tube Heat Exchangers AJW - Outside packed lantern ring.mp4 (15.33 MB)
1 Introduction to Shell and Tube HX.mp4 (18.95 MB)
10 AEP TEMA type exchangers Operation.mp4 (10.16 MB)
11 AEP TEMA type exchangers 2D dismantling.mp4 (6.97 MB)
12 AEP TEMA type exchangers 2D assembling.mp4 (8.27 MB)
13 CFU TEMA type exchangers Mechanical components.mp4 (28.6 MB)
14 CFU TEMA type exchangers Operation.mp4 (12.13 MB)
15 CFU TEMA type exchangers 2D dismantling.mp4 (6.25 MB)
16 CFU TEMA type exchangers 2D assembling.mp4 (6.52 MB)
17 AKT TEMA type exchangers Mechanical components.mp4 (35.42 MB)
18 AKT TEMA type exchangers Operation.mp4 (29.54 MB)
19 AKT TEMA type exchangers 2D dismantling.mp4 (6.65 MB)
2 AES TEMA type exchangers Mechanical components.mp4 (55.62 MB)
20 AKT TEMA type exchangers 2D assembling.mp4 (7.84 MB)
21 AJW TEMA type exchangers Mechanical components.mp4 (27.85 MB)
22 AJW TEMA type exchangers Operation.mp4 (19.78 MB)
23 AJW TEMA type exchangers 2D dismantling.mp4 (6.75 MB)
24 AJW TEMA type exchangers 2D assembling.mp4 (6.89 MB)
25 Before proceeding to the next section.mp4 (2.8 MB)
3 AES TEMA type exchangers Operation.mp4 (10.94 MB)
4 AES TEMA type exchangers 2D dismantling.mp4 (8.92 MB)
5 AES TEMA type exchangers 2D assembling.mp4 (8.33 MB)
6 BEM TEMA type exchangers Mechanical components.mp4 (33.78 MB)
7 BEM TEMA type exchangers Operation.mp4 (9.63 MB)
8 BEM TEMA type exchangers 2D dismantling and assembling.mp4 (8.42 MB)
9 AEP TEMA type exchangers Mechanical components.mp4 (34.57 MB)
1 About the next couple of videos.mp4 (1.11 MB)
2 Extracting a tube bundle.mp4 (70.39 MB)
3 Tube puller.mp4 (50.06 MB)
4 HP cleaning of heat exchangers.mp4 (20.02 MB)
5 Single lance tube cleaner.mp4 (15.1 MB)
6 Projectile tube cleaning method.mp4 (86.93 MB)
7 Ultrasonic cleaning of heat exchangers.mp4 (70.07 MB)
8 Inserting tubes.mp4 (4.28 MB)
9 Inserting back a tube bundle.mp4 (35.75 MB)
1 Introduction to tube construction.mp4 (14.91 MB)
2 Tube side header.mp4 (20.44 MB)
3 Tube side passes.mp4 (10.52 MB)
4 Finned tubes.mp4 (10.8 MB)
5 Tube layout.mp4 (22.82 MB)
6 Tube sheet.mp4 (24.45 MB)
7 Before proceeding to the next section.mp4 (2.8 MB)
1 Introduction to shell construction.mp4 (13.93 MB)
2 E shell type.mp4 (4.84 MB)
3 F shell type.mp4 (14.98 MB)
4 G shell type.mp4 (5.12 MB)
5 H shell type.mp4 (4.53 MB)
6 J shell type.mp4 (5.09 MB)
7 K shell type.mp4 (10.92 MB)
8 X shell type.mp4 (3.68 MB)
9 Before proceeding to the next section.mp4 (2.81 MB)
1 Introduction to baffle and tube bundle.mp4 (15 MB)
2 Segmental baffles.mp4 (32.12 MB)
3 Tie rods and baffle spacers.mp4 (16.08 MB)
4 Impingement baffles.mp4 (6.76 MB)
5 Vapor distribution.mp4 (11.05 MB)
6 Tube bundle bypassing.mp4 (22.6 MB)
7 Longitudinal baffles.mp4 (19.81 MB)
8 Before proceeding to the next section.mp4 (2.81 MB)
1 Introduction.mp4 (10.67 MB)
10 Guideline #9 Low heat transfer coefficient.mp4 (15.61 MB)
11 Guideline #10 Thermal expansion.mp4 (2.93 MB)
12 What you should remember !.mp4 (5.38 MB)
2 Guideline #1 Fouling tendencies.mp4 (28.3 MB)
3 Guideline #2 Corrosion.mp4 (15.8 MB)
4 Guideline #3 Criticality of fluids.mp4 (11.73 MB)
5 Guideline #4 Physical state of the fluids.mp4 (8.15 MB)
6 Guideline #5 Operating pressure and temperature.mp4 (7.2 MB)
7 Guideline #6 Allowable pressure drop.mp4 (4.44 MB)
8 Guideline #7 Viscosity and volumetric flowrate.mp4 (11.22 MB)
9 Guideline #8 Fluid velocity.mp4 (5.16 MB)
1 Introduction to HX design.mp4 (9.93 MB)
10 CMTD.mp4 (21.66 MB)
11 PRACTICE SESSION #3 CMTD calculation for a two pass heat exchanger.mp4 (28.08 MB)
12 PRACTICE SESSION #4 Effect of HX in series on the temperature efficiency factor.mp4 (20.71 MB)
13 How to connect multiple heat exchangers in series.mp4 (23.95 MB)
14 Influence of bypass stream on LMTD.mp4 (15.32 MB)
15 Weighted Mean Temperature Difference (WMTD).mp4 (28.02 MB)
16 Determining outlet temperatures for hot and cold fluids.mp4 (9.01 MB)
17 Determining heat transfer coefficients.mp4 (23.67 MB)
18 PRACTICE SESSION #5 Tube side heat transfer coefficient.mp4 (20.33 MB)
19 PRACTICE SESSION #6 Tube side heat transfer coefficient.mp4 (19.82 MB)
2 Heat exchange area.mp4 (11.38 MB)
20 More on tube side heat transfer coefficient.mp4 (15.79 MB)
21 More on shell side heat transfer coefficient.mp4 (54.8 MB)
22 Pressure losses in heat exchangers.mp4 (3.9 MB)
23 Tube side pressure losses.mp4 (5.48 MB)
24 PRACTICE SESSION #7 Calculating the tube side pressure loss.mp4 (17.48 MB)
25 Shell side pressure losses.mp4 (10.77 MB)
26 PRACTICE SESSION #8 Calculating the shell side pressure loss.mp4 (74.84 MB)
27 Important notes to remember.mp4 (6.15 MB)
28 Heat exchanger design tables.mp4 (32.26 MB)
29 PRACTICE SESSION #9 Design of a heat exchanger using design tables.mp4 (78.64 MB)
3 Heat exchanger design procedure.mp4 (62.09 MB)
30 Useful geometrical calculations.mp4 (40.91 MB)
31 Important notes.mp4 (4.7 MB)
32 Calculation #1 Heat exchange area.mp4 (2.14 MB)
33 Calculation #2 Tube side flow cross section.mp4 (2.07 MB)
34 Calculation #3 Tube flow velocity.mp4 (1.68 MB)
35 Calculation #4 Shell side flow cross section.mp4 (12.15 MB)
36 Calculation #5 Shell side cross stream velocity.mp4 (1.99 MB)
37 Calculation #6 Shell side longitudinal stream cross area.mp4 (15.48 MB)
38 Design best practice.mp4 (10.09 MB)
39 Calculation #7 Shell side longitudinal stream flow velocity.mp4 (1.9 MB)
4 PRACTICE SESSION #1 Design of a water cooler.mp4 (113.5 MB)
40 Calculation #8 Average shell side flow cross section.mp4 (1.91 MB)
41 Calculation #9 Average shell side flow velocity.mp4 (1.55 MB)
42 Calculation #10 Number of baffles.mp4 (1.45 MB)
43 Calculation #11 Number of tube rows in cross stream.mp4 (5.7 MB)
44 PRACTICE SESSION #10 Determining the required number of tubes per pass.mp4 (17.39 MB)
45 Calculation #12 Flow cross section for longitudinal flow.mp4 (8.96 MB)
46 Calculation #13 Number of total vertical tubes.mp4 (5.06 MB)
47 Calculation #14 Number of tubes in the cross stream between baffle windows.mp4 (4.41 MB)
48 PRACTICE SESSION #11 Shell side velocity calculations.mp4 (36.81 MB)
49 Before proceeding to the next section.mp4 (2.81 MB)
5 More on tube pattern.mp4 (14.82 MB)
6 Baffles.mp4 (16.98 MB)
7 Selection of a shell and tube heat exchanger.mp4 (12.87 MB)
8 LMTD.mp4 (5.74 MB)
9 PRACTICE SESSION #2 LMTD calculation.mp4 (8.6 MB)
1 Before starting this section.mp4 (13.02 MB)
2 Introduction.mp4 (10.04 MB)
3 Direct control system.mp4 (15.79 MB)
4 Bypass control system.mp4 (16.1 MB)
5 Air cooler control.mp4 (14.06 MB)
6 Heat transfer for heat recovery.mp4 (3.67 MB)
7 Back pressure control.mp4 (9.82 MB)
8 Basic fired heater control.mp4 (34 MB)
9 Complex fired heater control.mp4 (25.84 MB)
1 Types of fired heaters.mp4 (4.94 MB)
10 Tube bundles.mp4 (12.02 MB)
11 Tube coil supports.mp4 (6.46 MB)
12 Furnace wall lining.mp4 (19.23 MB)
13 Burners.mp4 (53.05 MB)
14 Air heaters.mp4 (8.86 MB)
15 Sweepers.mp4 (5.25 MB)
16 Before proceeding to the next section.mp4 (2.81 MB)
2 Vertical cylindrical furnaces.mp4 (10.98 MB)
3 Box type with vertical tubes.mp4 (2.92 MB)
4 Cabin type with horizontal tubes.mp4 (5.73 MB)
5 Radiant wall furnaces.mp4 (1.86 MB)
6 Double fired furnaces.mp4 (3.82 MB)
7 Summary.mp4 (18.38 MB)
8 Thermal efficiency.mp4 (16.92 MB)
9 Introduction to furnace components.mp4 (6.71 MB)
1 Downloadable resources.mp4 (3.57 MB)
1 Course introduction.mp4 (12.48 MB)
2 Before you start this online course.mp4 (16.9 MB)
1 Introduction to HX types.mp4 (32.96 MB)
10 Shell & Tube Heat Exchangers AES - Internal floating head.mp4 (11.73 MB)
11 Air coolers Overview.mp4 (28.29 MB)
12 Air coolers Forced draft Induced draft exchangers.mp4 (10.51 MB)
13 Plate and frame exchangers.mp4 (63.41 MB)
14 Spiral plate exchangers.mp4 (28.63 MB)
15 Plate and fin exchangers.mp4 (13.76 MB)
16 Spiral tube exchangers.mp4 (10.29 MB)
17 Double pipe exchangers.mp4 (8.8 MB)
18 Bayonet exchangers.mp4 (9.26 MB)
19 Jacketed vessels.mp4 (33.91 MB)
2 Various types.mp4 (3.1 MB)
20 Fired heaters overview.mp4 (12.41 MB)
21 Fired heater functions.mp4 (18.29 MB)
22 Description of a fired heater.mp4 (15.35 MB)
23 Before proceeding to the next section.mp4 (2.8 MB)
3 Shell & Tube Heat Exchangers Overview.mp4 (25.49 MB)
4 Shell & Tube Heat Exchangers TEMA types.mp4 (51.55 MB)
5 Shell & Tube Heat Exchangers BEM - Fixed tubesheet.mp4 (13.02 MB)
6 Shell & Tube Heat Exchangers CFU - U-tube.mp4 (16.12 MB)
7 Shell & Tube Heat Exchangers Floating tubesheet.mp4 (11.42 MB)
8 Shell & Tube Heat Exchangers AEP - Outside packed stuffing box.mp4 (17.72 MB)
9 Shell & Tube Heat Exchangers AJW - Outside packed lantern ring.mp4 (15.33 MB)
1 Introduction to Shell and Tube HX.mp4 (18.95 MB)
10 AEP TEMA type exchangers Operation.mp4 (10.16 MB)
11 AEP TEMA type exchangers 2D dismantling.mp4 (6.97 MB)
12 AEP TEMA type exchangers 2D assembling.mp4 (8.27 MB)
13 CFU TEMA type exchangers Mechanical components.mp4 (28.6 MB)
14 CFU TEMA type exchangers Operation.mp4 (12.13 MB)
15 CFU TEMA type exchangers 2D dismantling.mp4 (6.25 MB)
16 CFU TEMA type exchangers 2D assembling.mp4 (6.52 MB)
17 AKT TEMA type exchangers Mechanical components.mp4 (35.42 MB)
18 AKT TEMA type exchangers Operation.mp4 (29.54 MB)
19 AKT TEMA type exchangers 2D dismantling.mp4 (6.65 MB)
2 AES TEMA type exchangers Mechanical components.mp4 (55.62 MB)
20 AKT TEMA type exchangers 2D assembling.mp4 (7.84 MB)
21 AJW TEMA type exchangers Mechanical components.mp4 (27.85 MB)
22 AJW TEMA type exchangers Operation.mp4 (19.78 MB)
23 AJW TEMA type exchangers 2D dismantling.mp4 (6.75 MB)
24 AJW TEMA type exchangers 2D assembling.mp4 (6.89 MB)
25 Before proceeding to the next section.mp4 (2.8 MB)
3 AES TEMA type exchangers Operation.mp4 (10.94 MB)
4 AES TEMA type exchangers 2D dismantling.mp4 (8.92 MB)
5 AES TEMA type exchangers 2D assembling.mp4 (8.33 MB)
6 BEM TEMA type exchangers Mechanical components.mp4 (33.78 MB)
7 BEM TEMA type exchangers Operation.mp4 (9.63 MB)
8 BEM TEMA type exchangers 2D dismantling and assembling.mp4 (8.42 MB)
9 AEP TEMA type exchangers Mechanical components.mp4 (34.57 MB)
1 About the next couple of videos.mp4 (1.11 MB)
2 Extracting a tube bundle.mp4 (70.39 MB)
3 Tube puller.mp4 (50.06 MB)
4 HP cleaning of heat exchangers.mp4 (20.02 MB)
5 Single lance tube cleaner.mp4 (15.1 MB)
6 Projectile tube cleaning method.mp4 (86.93 MB)
7 Ultrasonic cleaning of heat exchangers.mp4 (70.07 MB)
8 Inserting tubes.mp4 (4.28 MB)
9 Inserting back a tube bundle.mp4 (35.75 MB)
1 Introduction to tube construction.mp4 (14.91 MB)
2 Tube side header.mp4 (20.44 MB)
3 Tube side passes.mp4 (10.52 MB)
4 Finned tubes.mp4 (10.8 MB)
5 Tube layout.mp4 (22.82 MB)
6 Tube sheet.mp4 (24.45 MB)
7 Before proceeding to the next section.mp4 (2.8 MB)
1 Introduction to shell construction.mp4 (13.93 MB)
2 E shell type.mp4 (4.84 MB)
3 F shell type.mp4 (14.98 MB)
4 G shell type.mp4 (5.12 MB)
5 H shell type.mp4 (4.53 MB)
6 J shell type.mp4 (5.09 MB)
7 K shell type.mp4 (10.92 MB)
8 X shell type.mp4 (3.68 MB)
9 Before proceeding to the next section.mp4 (2.81 MB)
1 Introduction to baffle and tube bundle.mp4 (15 MB)
2 Segmental baffles.mp4 (32.12 MB)
3 Tie rods and baffle spacers.mp4 (16.08 MB)
4 Impingement baffles.mp4 (6.76 MB)
5 Vapor distribution.mp4 (11.05 MB)
6 Tube bundle bypassing.mp4 (22.6 MB)
7 Longitudinal baffles.mp4 (19.81 MB)
8 Before proceeding to the next section.mp4 (2.81 MB)
1 Introduction.mp4 (10.67 MB)
10 Guideline #9 Low heat transfer coefficient.mp4 (15.61 MB)
11 Guideline #10 Thermal expansion.mp4 (2.93 MB)
12 What you should remember !.mp4 (5.38 MB)
2 Guideline #1 Fouling tendencies.mp4 (28.3 MB)
3 Guideline #2 Corrosion.mp4 (15.8 MB)
4 Guideline #3 Criticality of fluids.mp4 (11.73 MB)
5 Guideline #4 Physical state of the fluids.mp4 (8.15 MB)
6 Guideline #5 Operating pressure and temperature.mp4 (7.2 MB)
7 Guideline #6 Allowable pressure drop.mp4 (4.44 MB)
8 Guideline #7 Viscosity and volumetric flowrate.mp4 (11.22 MB)
9 Guideline #8 Fluid velocity.mp4 (5.16 MB)
1 Introduction to HX design.mp4 (9.93 MB)
10 CMTD.mp4 (21.66 MB)
11 PRACTICE SESSION #3 CMTD calculation for a two pass heat exchanger.mp4 (28.08 MB)
12 PRACTICE SESSION #4 Effect of HX in series on the temperature efficiency factor.mp4 (20.71 MB)
13 How to connect multiple heat exchangers in series.mp4 (23.95 MB)
14 Influence of bypass stream on LMTD.mp4 (15.32 MB)
15 Weighted Mean Temperature Difference (WMTD).mp4 (28.02 MB)
16 Determining outlet temperatures for hot and cold fluids.mp4 (9.01 MB)
17 Determining heat transfer coefficients.mp4 (23.67 MB)
18 PRACTICE SESSION #5 Tube side heat transfer coefficient.mp4 (20.33 MB)
19 PRACTICE SESSION #6 Tube side heat transfer coefficient.mp4 (19.82 MB)
2 Heat exchange area.mp4 (11.38 MB)
20 More on tube side heat transfer coefficient.mp4 (15.79 MB)
21 More on shell side heat transfer coefficient.mp4 (54.8 MB)
22 Pressure losses in heat exchangers.mp4 (3.9 MB)
23 Tube side pressure losses.mp4 (5.48 MB)
24 PRACTICE SESSION #7 Calculating the tube side pressure loss.mp4 (17.48 MB)
25 Shell side pressure losses.mp4 (10.77 MB)
26 PRACTICE SESSION #8 Calculating the shell side pressure loss.mp4 (74.84 MB)
27 Important notes to remember.mp4 (6.15 MB)
28 Heat exchanger design tables.mp4 (32.26 MB)
29 PRACTICE SESSION #9 Design of a heat exchanger using design tables.mp4 (78.64 MB)
3 Heat exchanger design procedure.mp4 (62.09 MB)
30 Useful geometrical calculations.mp4 (40.91 MB)
31 Important notes.mp4 (4.7 MB)
32 Calculation #1 Heat exchange area.mp4 (2.14 MB)
33 Calculation #2 Tube side flow cross section.mp4 (2.07 MB)
34 Calculation #3 Tube flow velocity.mp4 (1.68 MB)
35 Calculation #4 Shell side flow cross section.mp4 (12.15 MB)
36 Calculation #5 Shell side cross stream velocity.mp4 (1.99 MB)
37 Calculation #6 Shell side longitudinal stream cross area.mp4 (15.48 MB)
38 Design best practice.mp4 (10.09 MB)
39 Calculation #7 Shell side longitudinal stream flow velocity.mp4 (1.9 MB)
4 PRACTICE SESSION #1 Design of a water cooler.mp4 (113.5 MB)
40 Calculation #8 Average shell side flow cross section.mp4 (1.91 MB)
41 Calculation #9 Average shell side flow velocity.mp4 (1.55 MB)
42 Calculation #10 Number of baffles.mp4 (1.45 MB)
43 Calculation #11 Number of tube rows in cross stream.mp4 (5.7 MB)
44 PRACTICE SESSION #10 Determining the required number of tubes per pass.mp4 (17.39 MB)
45 Calculation #12 Flow cross section for longitudinal flow.mp4 (8.96 MB)
46 Calculation #13 Number of total vertical tubes.mp4 (5.06 MB)
47 Calculation #14 Number of tubes in the cross stream between baffle windows.mp4 (4.41 MB)
48 PRACTICE SESSION #11 Shell side velocity calculations.mp4 (36.81 MB)
49 Before proceeding to the next section.mp4 (2.81 MB)
5 More on tube pattern.mp4 (14.82 MB)
6 Baffles.mp4 (16.98 MB)
7 Selection of a shell and tube heat exchanger.mp4 (12.87 MB)
8 LMTD.mp4 (5.74 MB)
9 PRACTICE SESSION #2 LMTD calculation.mp4 (8.6 MB)
1 Before starting this section.mp4 (13.02 MB)
2 Introduction.mp4 (10.04 MB)
3 Direct control system.mp4 (15.79 MB)
4 Bypass control system.mp4 (16.1 MB)
5 Air cooler control.mp4 (14.06 MB)
6 Heat transfer for heat recovery.mp4 (3.67 MB)
7 Back pressure control.mp4 (9.82 MB)
8 Basic fired heater control.mp4 (34 MB)
9 Complex fired heater control.mp4 (25.84 MB)
1 Types of fired heaters.mp4 (4.94 MB)
10 Tube bundles.mp4 (12.02 MB)
11 Tube coil supports.mp4 (6.46 MB)
12 Furnace wall lining.mp4 (19.23 MB)
13 Burners.mp4 (53.05 MB)
14 Air heaters.mp4 (8.86 MB)
15 Sweepers.mp4 (5.25 MB)
16 Before proceeding to the next section.mp4 (2.81 MB)
2 Vertical cylindrical furnaces.mp4 (10.98 MB)
3 Box type with vertical tubes.mp4 (2.92 MB)
4 Cabin type with horizontal tubes.mp4 (5.73 MB)
5 Radiant wall furnaces.mp4 (1.86 MB)
6 Double fired furnaces.mp4 (3.82 MB)
7 Summary.mp4 (18.38 MB)
8 Thermal efficiency.mp4 (16.92 MB)
9 Introduction to furnace components.mp4 (6.71 MB)
1 Downloadable resources.mp4 (3.57 MB)
Screenshot
RapidGator
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
