Steel Structure Connection Design | IDEA StatiCa | From Zero

[dkmdkm]

Free Download Steel Structure Connection Design | IDEA StatiCa | From Zero
Published 12/2025
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Language: English | Duration: 10h 22m | Size: 9.35 GB
3DModeling, Analysis & Design of different connections : Rigid & Semi Rigid beam to column, brace, base plate, splice

What you'll learn
Introduction to Steel Structure Connection Design
Practical Use of Software Operators for Modeling and Design such as: Cut, Cut-Off Plate, Stiffener, Stiffening Plate, End Plate, Shifted End Plate
Practical Use of Software Operators for Modeling and Design such as: Cleat, Rib, Widener, Base Plate, Gusset Plate, Weld, Splice Plate, Opening, Fin Plate
Modeling, Analysis, and Design of Various Rigid Beam-to-Column Connections based on AISC code.
Friction Bolted and Welded Connections: Using top and bottom plates and fin plates.
Connections with Tee Sections: Incorporating tee-shaped sections for enhanced moment transfer.
Direct Beam Connections with Reduced Sections: Featuring reduced beam section (RBS) profiles.
End-Plate Connections: With and without stiffeners.
Doubler Plates and Continuity Plates: Modeling and analyzing these elements, including the use of fillet and butt welds.
Evaluation, Interpretation of Results, and Model Improvements to Satisfy AISC Code Requirements.
Investigating the Source of Differences Between Software and Manual Calculations.
Modeling, Analysis, and Design of Rectangular and Custom-Shaped Gusset Plates.
Designing gusset plates to satisfy the brace-to-free edge distance requirement for out-of-plane buckling.
Strengthening rectangular plates to resist out-of-plane moments caused by brace buckling.
Buckling Analysis and Control: Conducting buckling analysis to evaluate modes such as local and global buckling.
Modeling, Analysis, and Design of Base Plates and Anchor Bolts based on American standards: Designing base plates to accommodate axial, shear,and bending forces
Modeling, Analysis, and Design of Splice Plates with Bolted Connections in Beams based on AISC code.
Modeling, Analysis, and Design of Splice Plates with Combined Bolted and Welded Connections in the Columns based on AISC code
Code Compliance Checks: Verifying the design against code-specific requirements for failure modes, including: Pullout Failure, Shear Failure, Concrete Breakout
Requirements
Basics principles of structural engineering
Familiarity with steel structures
Description
Note: This course is full of real-word examples of steel connections.• Are you ready to develop engineering judgment and interpretation skills for steel connection design, instead of just learning how to model?• Do you want to compare IDEA StatiCa results with manual calculations and see why differences appear in beam-to-column connections, base plates, and gusset plates?• Are you prepared to tackle real-world steel connection design challenges faced by professional engineers in structural engineering projects?This course is a comprehensive and professional training on Steel Structure Connection Design using IDEA StatiCa, developed for engineers who want to master modeling, analysis, design, and interpretation of steel connections from zero to professional level.Unlike basic software tutorials, this course focuses on real engineering behavior, code-based design, and result interpretation, helping you understand why a connection passes or fails - not just how to model it.You will work with a wide range of moment connections, shear connections, braced connections, gusset plates, base plates, beam splices, and column splices, following AISC and ACI design concepts, capacity design principles, and nonlinear stress-strain analysis.Headlines:1-Practical Use of Software Operators for Modeling and Design2-Various Rigid Beam-to-Column Connections Based on AISC Code3-Friction-Bolted and Welded Connections4-Semi-Rigid Connections with Tee Sections5-Featuring Reduced Beam Section (RBS) Profiles6-End-Plate Connections With and Without Stiffeners7-Doubler Plates and Continuity Plates8-Fillet and Butt Welds9-Evaluation and Interpretation of Results, and Model Improvements to Satisfy AISC Code Requirements10-Investigating the Sources of Differences Between Software and Manual Calculations11-Custom-Shaped Gusset Plates12-Requirement for Out-of-Plane Buckling13-Brace Buckling14-Local and Global Buckling15-Design of Base Plates and Anchor Bolts Based on American Standards16-Pullout Failure, Shear Failure, Concrete Breakout, and Base Plate Yielding18-Design of Beam Splice Plates Based on AISC Code19-Design of Column Splice Plates with Combined Bolted and Welded Connections Based on AISC CodeFeel free to ask me any questions while going through the course. As you learn steel structure design, just reach out-I'm here to guide you and make sure you fully understand every concept.
Who this course is for
Structural and civil engineers
Steel structure designers
Engineers working with steel connections
Graduate and senior undergraduate engineering students
Professionals who want to understand connection behavior, not just software commands
Homepage

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

No Password - Links are Interchangeable

 

[0dayddl]

9.35 GB | 44min 6s | mp4 | 1920X1080 | 16:9
Genre:eLearning |Language:English​

Files Included :

Spoiler

FileName :1 Modeling beam to column connections with custom steel sections and materials.mp4 | Size: (450.84 MB)
FileName :2 Beam web openings fin plate connections top bottom plates with splice cut.mp4 | Size: (519.37 MB)
FileName :3 Applying loads and analyzing their effects on bending moment distribution.mp4 | Size: (133.12 MB)
FileName :4 Capacity design of connections with friction bolts according to AISC.mp4 | Size: (329.19 MB)
FileName :5 Improving bolted moment connections and full introduction to the Weld operator.mp4 | Size: (222.15 MB)
FileName :6 Interpreting design results of bolted top & bottom plate moment connections.mp4 | Size: (83.72 MB)
FileName :7 Evaluating bolt diameter effects on demand capacity ratio and prying action.mp4 | Size: (56.36 MB)
FileName :8 Welded moment connections design weak beam-strong column check.mp4 | Size: (318.54 MB)
FileName :9 Interpreting bolted moment results and comparing software vs manual calculation.mp4 | Size: (464.5 MB)
FileName :10 Design of weak axis moment beam to column connections with T sections.mp4 | Size: (340.39 MB)
FileName :11 Design and optimization of semi rigid bolted moment connections.mp4 | Size: (476.97 MB)
FileName :12 RBS moment connections design&analysis with seismic loading&panel strengthening.mp4 | Size: (467.98 MB)
FileName :13 End plate moment design with reinforcement and triangle stiffeners.mp4 | Size: (516.19 MB)
FileName :14 Buckling analysis of connection & section plates with mode checks.mp4 | Size: (344.5 MB)
FileName :15 Braced connections design with rectangular gusset plates buckling& apacity check.mp4 | Size: (507.69 MB)
FileName :16 Introduction to the Plate Editor for advanced geometrical editing of plates.mp4 | Size: (126.71 MB)
FileName :17 Checking gusset plate size & welds based on brace geometry and buckling.mp4 | Size: (188.33 MB)
FileName :18 Evaluating brace angle effects on gusset plate edge distance and load path.mp4 | Size: (216.59 MB)
FileName :19 Design of gusset plates with tensile compressive & post buckling brace capacity.mp4 | Size: (355.04 MB)
FileName :20 Step by step conversion of gussets to custom polygons using Plate Editor.mp4 | Size: (194.68 MB)
FileName :21 Design of stiffened gusset plates to resist brace buckling and improve stability.mp4 | Size: (244.85 MB)
FileName :22 Intro to software based base plate & anchor design with ACI checks.mp4 | Size: (347.22 MB)
FileName :23 Base plate design for I columns under axial shear & bending with anchor checks.mp4 | Size: (617.69 MB)
FileName :24 Design of base plates for box columns near edges with stiffeners & manual check.mp4 | Size: (394.65 MB)
FileName :25 Interpreting base plate design results including stiffener influence.mp4 | Size: (136.69 MB)
FileName :26 Modeling heavily loaded base plates with stiffeners and optimized anchor layouts.mp4 | Size: (595.43 MB)
FileName :27 Design of beam splices with flange web plates & friction bolts.mp4 | Size: (542.17 MB)
FileName :28 Design of column splices with bolts & welds including strain and rupture checks.mp4 | Size: (387.51 MB)

]
Screenshot

Spoiler

RapidGator

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

DDownload

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!