8.58 GB | 13min 13s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English
Files Included :
1 Introduction.mp4 (12.96 MB)
1 Engineering Drawing Graphics.mp4 (7.54 MB)
10 Lines and its types.mp4 (34.38 MB)
11 Scales on drawings.mp4 (21.71 MB)
12 Different types of Scales.mp4 (11.85 MB)
13 Dimensioning and its types.mp4 (15.7 MB)
14 Structure of dimensioning.mp4 (32.54 MB)
15 Rules of Dimensioning.mp4 (52.67 MB)
16 Tolerances.mp4 (25.27 MB)
17 Basics of interpreting engineering drawings.mp4 (21.14 MB)
2 Drawing Instruments and their Use.mp4 (44.34 MB)
3 Use of Drafting Machine drafter.mp4 (72.87 MB)
4 Standard Paper Sizes.mp4 (28.29 MB)
5 Layout of Drawing Sheets.mp4 (27.05 MB)
6 Layout of title block.mp4 (36.38 MB)
7 Folding Drawing Sheets for storage.mp4 (121.73 MB)
8 Lettering.mp4 (35.55 MB)
9 Drawing standards, tips & best practices.mp4 (18.04 MB)
1 Introduction to Geometric Construction.mp4 (9.87 MB)
10 Angle bisector.mp4 (36.71 MB)
11 Fillet between 2 perpendicular lines.mp4 (60.47 MB)
12 Tangent to circle.mp4 (42.97 MB)
13 Introduction to conic sections.mp4 (52.93 MB)
14 Ellipse.mp4 (25.45 MB)
15 Drawing ellipse on a drawing sheet.mp4 (124.29 MB)
16 Parabola.mp4 (23.7 MB)
17 Drawing parabola on a drawing sheet.mp4 (76.37 MB)
18 Hyperbola.mp4 (24.39 MB)
19 Drawing hyperbola on a drawing sheet.mp4 (120.93 MB)
2 Drawing points & lines.mp4 (21.24 MB)
20 Cycloid.mp4 (37.73 MB)
21 Drawing cycloid on a drawing sheet.mp4 (232.02 MB)
3 Bisecting a line.mp4 (31.36 MB)
4 Dividing a line into equal parts.mp4 (72.73 MB)
5 Perpendicular to a line from and to a point.mp4 (87.77 MB)
6 Draw parallel & perpendicular lines using drafter.mp4 (52.63 MB)
7 Dividing circle into equal parts.mp4 (42.27 MB)
8 Bisecting an arc.mp4 (32.88 MB)
9 Polygon.mp4 (105.79 MB)
1 An introduction to Projection of objects.mp4 (92.17 MB)
10 Introduction to projection of solids.mp4 (5.64 MB)
11 Projection of a Cuboid.mp4 (89.51 MB)
12 Drawing the views of cuboid on drawing sheet.mp4 (86.62 MB)
13 Projection of a Cylinder.mp4 (30.59 MB)
14 Drawing the views of cylinder on drawing sheet.mp4 (55.25 MB)
15 Projection of a Cone.mp4 (34.7 MB)
16 Drawing the views of cone on drawing sheet.mp4 (64.83 MB)
17 Projection of example-1.mp4 (111.88 MB)
18 Drawing the views of example-1 on drawing sheet.mp4 (146.17 MB)
19 Projection of example-2.mp4 (86.53 MB)
2 Principles of Projection.mp4 (22.29 MB)
20 Drawing the views of example-2 on drawing sheet.mp4 (139.26 MB)
21 Projection of example-3.mp4 (67.56 MB)
22 Drawing the views of example-3 on drawing sheet.mp4 (171.08 MB)
23 Auxiliary projection of an object & example-4.mp4 (81.84 MB)
24 Drawing the views of example-4 on drawing sheet.mp4 (256.49 MB)
3 Methods of projection.mp4 (37.67 MB)
4 Introduction to orthographic projection.mp4 (79.43 MB)
5 Basic projection planes - HP and VP.mp4 (27.55 MB)
6 Projection views.mp4 (84.24 MB)
7 First and Third Angle Projection.mp4 (61.36 MB)
8 Projection of Points.mp4 (30 MB)
9 Projection of Lines.mp4 (67.04 MB)
1 Introduction to Sections and sectional views.mp4 (30.64 MB)
10 Example-2 (Half sectional view).mp4 (71.83 MB)
11 Intersection and interpenetration of right regular solids- 2 Cylinders.mp4 (37.43 MB)
12 Intersection and interpenetration of right regular solids- Cylinder vs Prism.mp4 (27.1 MB)
13 Intersection and interpenetration of right regular solids- Cylinder vs cone.mp4 (35.54 MB)
2 Section view examples.mp4 (55.21 MB)
3 Section planes.mp4 (79.97 MB)
4 Prism.mp4 (40.85 MB)
5 Cylinder.mp4 (38.99 MB)
6 Pyramid.mp4 (37.44 MB)
7 Cone.mp4 (10.42 MB)
8 Types of sectional views.mp4 (6.1 MB)
9 Example-1 (Full sectional view).mp4 (224.66 MB)
1 Principles of Isometric Projection.mp4 (32.93 MB)
2 Isometric Views.mp4 (28 MB)
3 Isometric Views of Simple and Compound Solids.mp4 (57.77 MB)
4 Conversion of Isometric Views to Orthographic Views- Example-1.mp4 (175.59 MB)
5 Conversion of Isometric Views to Orthographic Views- Example-2.mp4 (187.97 MB)
6 Conversion of Isometric Views to Orthographic Views- Example-3.mp4 (272.5 MB)
7 Conversion of Orthographic Views to Isometric Views- Example-1.mp4 (65.21 MB)
8 Conversion of Orthographic Views to Isometric Views- Example-2.mp4 (85.83 MB)
9 Conversion of Orthographic Views to Isometric Views- Example-3.mp4 (183.12 MB)
1 Need for CADr.mp4 (21.72 MB)
2 CADr Softwares used in industries.mp4 (12.15 MB)
3 Introduction to AutoCAD.mp4 (61.48 MB)
4 Introduction to CATIA.mp4 (58.15 MB)
1 About AutoCAD 2018.mp4 (24.32 MB)
2 AutoCAD 2018 User Interface & Workspaces.mp4 (32.08 MB)
3 File Handling.mp4 (28.75 MB)
1 Introduction.mp4 (19.58 MB)
2 AutoCAD 2018 User Interface.mp4 (32.1 MB)
3 AutoCAD 2015 vs 2018 User Interface.mp4 (20.5 MB)
4 AutoCAD 2016 vs 2018 User Interface.mp4 (15.54 MB)
5 AutoCAD 2017 vs 2018 User Interface.mp4 (14.86 MB)
6 AutoCAD 2019 vs 2018 User Interface.mp4 (28.14 MB)
7 AutoCAD 2020 vs 2018 User Interface.mp4 (30.91 MB)
8 AutoCAD 2021 vs 2018 User Interface.mp4 (31.8 MB)
9 AutoCAD 2022 vs 2018 User Interface.mp4 (44.44 MB)
1 Visual control tools, Ortho method, Object snapping & Selection (EX-1,2).mp4 (110.31 MB)
2 Offset method for drawing Lines(EX-1).mp4 (96.9 MB)
3 Example-2 using Offset method.mp4 (67.14 MB)
4 Object tracking & Generating Orthographic Views (EX-3).mp4 (68.57 MB)
5 Chamfer & Intro to Dimensioning- Linear, Aligned & Angular (EX-4).mp4 (85.07 MB)
6 Example-4 (Figure-2).mp4 (69.89 MB)
1 Circles using center & Radius or Diameter and Appling Fillet (EX-5).mp4 (139.57 MB)
2 Object Properties, Match Properties, Properties Toolbar & Line type scaling.mp4 (77.27 MB)
3 Center Mark & Intro to Rotate(EX-6).mp4 (130.38 MB)
4 Exercise-1.mp4 (82.08 MB)
5 Exercise-2.mp4 (37.61 MB)
6 Circles- in depth (EX-7).mp4 (43.63 MB)
7 Arcs- in depth (EX-8).mp4 (66.35 MB)
1 Array & Mirror(EX-9).mp4 (99.5 MB)
10 Scale, Offset, Trim, Extend, Join & Explode (EX- 11).mp4 (56.11 MB)
2 Exercise-3.mp4 (54.82 MB)
3 Exercise-4.mp4 (103.71 MB)
4 Exercise-5.mp4 (237.32 MB)
5 Copy & Move (EX-10).mp4 (47.15 MB)
6 Exercise-6.mp4 (91.07 MB)
7 Hatch & Gradient.mp4 (48.41 MB)
8 Exercise-7.mp4 (99.36 MB)
9 Exercise-8.mp4 (100.93 MB)
1 Rectangle, Polygon, Ellipse & Splines.mp4 (49.38 MB)
2 Leader, Jogged Dimensioning & Dimension Style (EX-2).mp4 (57.21 MB)
3 Inserting Text & Tables.mp4 (34.18 MB)
1 View Cube, Generating Primitives, Rotate Visual Tool & Changing Visual Styles.mp4 (51.42 MB)
2 Extrude & Boolean Operations on solids (Example -12, Example -13).mp4 (125.08 MB)
3 Press pull, Chamfer & Fillet (Example -14).mp4 (73.21 MB)
4 Revolve (Example -15).mp4 (31.04 MB)
5 UCS & WCS, Sweep (Example -16).mp4 (28.42 MB)
6 Loft (Example -17).mp4 (19.18 MB)
7 3D Array (Example -18).mp4 (51.95 MB)
8 Mirror (Example -19).mp4 (25.17 MB)
1 Setting drawing Units & View Ribbon.mp4 (29.8 MB)
2 Copying drawings to multiple AutoCAD files.mp4 (6.53 MB)
3 Customizing AutoCAD.mp4 (27.45 MB)
4 Plot Settings, Printing on Paper& Exporting Drawing in pdf & jpg formats.mp4 (34.72 MB)
1 Engineering Drawing Graphics.mp4 (7.54 MB)
10 Lines and its types.mp4 (34.38 MB)
11 Scales on drawings.mp4 (21.71 MB)
12 Different types of Scales.mp4 (11.85 MB)
13 Dimensioning and its types.mp4 (15.7 MB)
14 Structure of dimensioning.mp4 (32.54 MB)
15 Rules of Dimensioning.mp4 (52.67 MB)
16 Tolerances.mp4 (25.27 MB)
17 Basics of interpreting engineering drawings.mp4 (21.14 MB)
2 Drawing Instruments and their Use.mp4 (44.34 MB)
3 Use of Drafting Machine drafter.mp4 (72.87 MB)
4 Standard Paper Sizes.mp4 (28.29 MB)
5 Layout of Drawing Sheets.mp4 (27.05 MB)
6 Layout of title block.mp4 (36.38 MB)
7 Folding Drawing Sheets for storage.mp4 (121.73 MB)
8 Lettering.mp4 (35.55 MB)
9 Drawing standards, tips & best practices.mp4 (18.04 MB)
1 Introduction to Geometric Construction.mp4 (9.87 MB)
10 Angle bisector.mp4 (36.71 MB)
11 Fillet between 2 perpendicular lines.mp4 (60.47 MB)
12 Tangent to circle.mp4 (42.97 MB)
13 Introduction to conic sections.mp4 (52.93 MB)
14 Ellipse.mp4 (25.45 MB)
15 Drawing ellipse on a drawing sheet.mp4 (124.29 MB)
16 Parabola.mp4 (23.7 MB)
17 Drawing parabola on a drawing sheet.mp4 (76.37 MB)
18 Hyperbola.mp4 (24.39 MB)
19 Drawing hyperbola on a drawing sheet.mp4 (120.93 MB)
2 Drawing points & lines.mp4 (21.24 MB)
20 Cycloid.mp4 (37.73 MB)
21 Drawing cycloid on a drawing sheet.mp4 (232.02 MB)
3 Bisecting a line.mp4 (31.36 MB)
4 Dividing a line into equal parts.mp4 (72.73 MB)
5 Perpendicular to a line from and to a point.mp4 (87.77 MB)
6 Draw parallel & perpendicular lines using drafter.mp4 (52.63 MB)
7 Dividing circle into equal parts.mp4 (42.27 MB)
8 Bisecting an arc.mp4 (32.88 MB)
9 Polygon.mp4 (105.79 MB)
1 An introduction to Projection of objects.mp4 (92.17 MB)
10 Introduction to projection of solids.mp4 (5.64 MB)
11 Projection of a Cuboid.mp4 (89.51 MB)
12 Drawing the views of cuboid on drawing sheet.mp4 (86.62 MB)
13 Projection of a Cylinder.mp4 (30.59 MB)
14 Drawing the views of cylinder on drawing sheet.mp4 (55.25 MB)
15 Projection of a Cone.mp4 (34.7 MB)
16 Drawing the views of cone on drawing sheet.mp4 (64.83 MB)
17 Projection of example-1.mp4 (111.88 MB)
18 Drawing the views of example-1 on drawing sheet.mp4 (146.17 MB)
19 Projection of example-2.mp4 (86.53 MB)
2 Principles of Projection.mp4 (22.29 MB)
20 Drawing the views of example-2 on drawing sheet.mp4 (139.26 MB)
21 Projection of example-3.mp4 (67.56 MB)
22 Drawing the views of example-3 on drawing sheet.mp4 (171.08 MB)
23 Auxiliary projection of an object & example-4.mp4 (81.84 MB)
24 Drawing the views of example-4 on drawing sheet.mp4 (256.49 MB)
3 Methods of projection.mp4 (37.67 MB)
4 Introduction to orthographic projection.mp4 (79.43 MB)
5 Basic projection planes - HP and VP.mp4 (27.55 MB)
6 Projection views.mp4 (84.24 MB)
7 First and Third Angle Projection.mp4 (61.36 MB)
8 Projection of Points.mp4 (30 MB)
9 Projection of Lines.mp4 (67.04 MB)
1 Introduction to Sections and sectional views.mp4 (30.64 MB)
10 Example-2 (Half sectional view).mp4 (71.83 MB)
11 Intersection and interpenetration of right regular solids- 2 Cylinders.mp4 (37.43 MB)
12 Intersection and interpenetration of right regular solids- Cylinder vs Prism.mp4 (27.1 MB)
13 Intersection and interpenetration of right regular solids- Cylinder vs cone.mp4 (35.54 MB)
2 Section view examples.mp4 (55.21 MB)
3 Section planes.mp4 (79.97 MB)
4 Prism.mp4 (40.85 MB)
5 Cylinder.mp4 (38.99 MB)
6 Pyramid.mp4 (37.44 MB)
7 Cone.mp4 (10.42 MB)
8 Types of sectional views.mp4 (6.1 MB)
9 Example-1 (Full sectional view).mp4 (224.66 MB)
1 Principles of Isometric Projection.mp4 (32.93 MB)
2 Isometric Views.mp4 (28 MB)
3 Isometric Views of Simple and Compound Solids.mp4 (57.77 MB)
4 Conversion of Isometric Views to Orthographic Views- Example-1.mp4 (175.59 MB)
5 Conversion of Isometric Views to Orthographic Views- Example-2.mp4 (187.97 MB)
6 Conversion of Isometric Views to Orthographic Views- Example-3.mp4 (272.5 MB)
7 Conversion of Orthographic Views to Isometric Views- Example-1.mp4 (65.21 MB)
8 Conversion of Orthographic Views to Isometric Views- Example-2.mp4 (85.83 MB)
9 Conversion of Orthographic Views to Isometric Views- Example-3.mp4 (183.12 MB)
1 Need for CADr.mp4 (21.72 MB)
2 CADr Softwares used in industries.mp4 (12.15 MB)
3 Introduction to AutoCAD.mp4 (61.48 MB)
4 Introduction to CATIA.mp4 (58.15 MB)
1 About AutoCAD 2018.mp4 (24.32 MB)
2 AutoCAD 2018 User Interface & Workspaces.mp4 (32.08 MB)
3 File Handling.mp4 (28.75 MB)
1 Introduction.mp4 (19.58 MB)
2 AutoCAD 2018 User Interface.mp4 (32.1 MB)
3 AutoCAD 2015 vs 2018 User Interface.mp4 (20.5 MB)
4 AutoCAD 2016 vs 2018 User Interface.mp4 (15.54 MB)
5 AutoCAD 2017 vs 2018 User Interface.mp4 (14.86 MB)
6 AutoCAD 2019 vs 2018 User Interface.mp4 (28.14 MB)
7 AutoCAD 2020 vs 2018 User Interface.mp4 (30.91 MB)
8 AutoCAD 2021 vs 2018 User Interface.mp4 (31.8 MB)
9 AutoCAD 2022 vs 2018 User Interface.mp4 (44.44 MB)
1 Visual control tools, Ortho method, Object snapping & Selection (EX-1,2).mp4 (110.31 MB)
2 Offset method for drawing Lines(EX-1).mp4 (96.9 MB)
3 Example-2 using Offset method.mp4 (67.14 MB)
4 Object tracking & Generating Orthographic Views (EX-3).mp4 (68.57 MB)
5 Chamfer & Intro to Dimensioning- Linear, Aligned & Angular (EX-4).mp4 (85.07 MB)
6 Example-4 (Figure-2).mp4 (69.89 MB)
1 Circles using center & Radius or Diameter and Appling Fillet (EX-5).mp4 (139.57 MB)
2 Object Properties, Match Properties, Properties Toolbar & Line type scaling.mp4 (77.27 MB)
3 Center Mark & Intro to Rotate(EX-6).mp4 (130.38 MB)
4 Exercise-1.mp4 (82.08 MB)
5 Exercise-2.mp4 (37.61 MB)
6 Circles- in depth (EX-7).mp4 (43.63 MB)
7 Arcs- in depth (EX-8).mp4 (66.35 MB)
1 Array & Mirror(EX-9).mp4 (99.5 MB)
10 Scale, Offset, Trim, Extend, Join & Explode (EX- 11).mp4 (56.11 MB)
2 Exercise-3.mp4 (54.82 MB)
3 Exercise-4.mp4 (103.71 MB)
4 Exercise-5.mp4 (237.32 MB)
5 Copy & Move (EX-10).mp4 (47.15 MB)
6 Exercise-6.mp4 (91.07 MB)
7 Hatch & Gradient.mp4 (48.41 MB)
8 Exercise-7.mp4 (99.36 MB)
9 Exercise-8.mp4 (100.93 MB)
1 Rectangle, Polygon, Ellipse & Splines.mp4 (49.38 MB)
2 Leader, Jogged Dimensioning & Dimension Style (EX-2).mp4 (57.21 MB)
3 Inserting Text & Tables.mp4 (34.18 MB)
1 View Cube, Generating Primitives, Rotate Visual Tool & Changing Visual Styles.mp4 (51.42 MB)
2 Extrude & Boolean Operations on solids (Example -12, Example -13).mp4 (125.08 MB)
3 Press pull, Chamfer & Fillet (Example -14).mp4 (73.21 MB)
4 Revolve (Example -15).mp4 (31.04 MB)
5 UCS & WCS, Sweep (Example -16).mp4 (28.42 MB)
6 Loft (Example -17).mp4 (19.18 MB)
7 3D Array (Example -18).mp4 (51.95 MB)
8 Mirror (Example -19).mp4 (25.17 MB)
1 Setting drawing Units & View Ribbon.mp4 (29.8 MB)
2 Copying drawings to multiple AutoCAD files.mp4 (6.53 MB)
3 Customizing AutoCAD.mp4 (27.45 MB)
4 Plot Settings, Printing on Paper& Exporting Drawing in pdf & jpg formats.mp4 (34.72 MB)
Screenshot
RapidGator
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
