5.3 GB | 23min 45s | mp4 | 2560X1440 | 16:9
Genre:eLearning |Language:English
Files Included :
FileName :00 - Introduction.mp4 | Size: (72.28 MB)
FileName :A 01 - After subdiv model collapses.mp4 | Size: (59.54 MB)
FileName :A 02 - Selecting a loop.mp4 | Size: (10.58 MB)
FileName :A 03 - Supporting loops dont follow my main loop.mp4 | Size: (34.49 MB)
FileName :A 04 - Z-Fighting.mp4 | Size: (19.56 MB)
FileName :A 05 - Seams.mp4 | Size: (23.36 MB)
FileName :A 06 - Wrinkles.mp4 | Size: (31.94 MB)
FileName :A 07 - Should I avoid poles.mp4 | Size: (126.35 MB)
FileName :A 08 - Adding loops to curved surfaces.mp4 | Size: (67.05 MB)
FileName :A 09 - Adding detail in just one place.mp4 | Size: (80.14 MB)
FileName :B 01 - Invisible polygons.mp4 | Size: (15.13 MB)
FileName :B 02 - Faceted look.mp4 | Size: (12.99 MB)
FileName :B 03 - Autosmooth is locked.mp4 | Size: (13.37 MB)
FileName :B 04 - Smooth shading is too smooth.mp4 | Size: (26.34 MB)
FileName :B 05 - Smooth shading is flat.mp4 | Size: (20.2 MB)
FileName :B 06 - Change bevel profile without editing polys.mp4 | Size: (16.79 MB)
FileName :C 01 - Cutting details into curved surfaces.mp4 | Size: (158.44 MB)
FileName :C 02 - Half car half pancake.mp4 | Size: (226.6 MB)
FileName :C 03 - Revert subdivision.mp4 | Size: (49.76 MB)
FileName :C 04 - Im still getting subdivision pinching.mp4 | Size: (298 MB)
FileName :C 05 - Triangular wedge.mp4 | Size: (82.37 MB)
FileName
01 - Icons and patterns.mp4 | Size: (80.29 MB)
FileName 02 - Bend high poly cable like a spline.mp4 | Size: (35.2 MB)
FileName 03 - Smooth out wires.mp4 | Size: (69.93 MB)
FileName :E 01 - Flat ngon surface is glitchy.mp4 | Size: (21.76 MB)
FileName :E 02 - ZBrush doesnt read Blender ngons.mp4 | Size: (29.96 MB)
FileName :E 03 - Model deforms in ugly way.mp4 | Size: (51.1 MB)
FileName :E 04 - My mesh full of ngons.mp4 | Size: (52.48 MB)
FileName :E 05 - All quad doesnt bevel well.mp4 | Size: (50.32 MB)
FileName :F 01 - Do I have to mesh everything.mp4 | Size: (57.08 MB)
FileName :F 02 - Rotary details - mesh level.mp4 | Size: (125.13 MB)
FileName :F 03 - Rotary details - object level.mp4 | Size: (51.06 MB)
FileName :F 04 - Automotive curves arent smooth enough.mp4 | Size: (37.34 MB)
FileName :F 05 - Map highpoly mesh to curved surface.mp4 | Size: (37.65 MB)
FileName :F 06 - Modifiers dont work as expected.mp4 | Size: (46.5 MB)
FileName :F 07 - Deform compound object.mp4 | Size: (27.61 MB)
FileName :F 08 - Make geometry thicker.mp4 | Size: (55.5 MB)
FileName :F 09 - Mirrored mesh intersects itself.mp4 | Size: (35.89 MB)
FileName :F 10 - Mirror slicing plane.mp4 | Size: (14.3 MB)
FileName :G 01 - How to slice panel.mp4 | Size: (54.61 MB)
FileName :G 02 - Boolean non water tight.mp4 | Size: (149.1 MB)
FileName :G 03 - Boolean workflow is inefficient.mp4 | Size: (113.72 MB)
FileName :G 04 - How do you integrate plugs.mp4 | Size: (87.18 MB)
FileName :G 05 - Kitbash object looks out of place.mp4 | Size: (75.24 MB)
FileName :G 06 - High poly boolean makes beveling impossible.mp4 | Size: (49.95 MB)
FileName :G 07 - Subdiv after boolean.mp4 | Size: (51.76 MB)
FileName :G 08 - Model indentation.mp4 | Size: (51.36 MB)
FileName :H 01 - Problem with wide bevels.mp4 | Size: (55.31 MB)
FileName :H 02 - Artifacts after beveling part 1.mp4 | Size: (112.59 MB)
FileName :H 03 - Artifacts after beveling part 2.mp4 | Size: (51.71 MB)
FileName :H 04 - Impossible to bevel.mp4 | Size: (74.56 MB)
FileName :H 05 - Variable radius fillets Blender.mp4 | Size: (103.33 MB)
FileName :I 01 - No1 problem of all time.mp4 | Size: (43.82 MB)
FileName :I 02 - Align faces between objects.mp4 | Size: (50.3 MB)
FileName :J 01 - Object light leak.mp4 | Size: (46.13 MB)
FileName :J 02 - Mesh intersection.mp4 | Size: (39.41 MB)
FileName :K 01 - Straighten an edge.mp4 | Size: (23.13 MB)
FileName :K 02 - Lofting shapes.mp4 | Size: (117.54 MB)
FileName :K 03 - Multi-angled groove.mp4 | Size: (107.86 MB)
FileName :K 04 - Swap the mesh.mp4 | Size: (48.92 MB)
FileName :L 01 - Reducing polycount on a cylinder.mp4 | Size: (61.82 MB)
FileName :L 02 - How to extract piece of mesh.mp4 | Size: (78.33 MB)
FileName :L 03 - Extracting from a subd mesh.mp4 | Size: (152.27 MB)
FileName :L 04 - Meshed text is horrible.mp4 | Size: (43.84 MB)
FileName :L 05 - Optimize a quad mesh without altering curvature.mp4 | Size: (21.93 MB)
FileName :M 01 - Mesh has too many polygons.mp4 | Size: (261.43 MB)
FileName :M 02 - WTH is with my scene.mp4 | Size: (31.33 MB)
FileName :M 03 - Move compound objects with modifiers.mp4 | Size: (43.51 MB)
FileName :N 01 - Exported mesh looks not as intended.mp4 | Size: (89.39 MB)
FileName :O 01 - Model detailed cutouts.mp4 | Size: (46.55 MB)
FileName :O 02 - Rotate topology 45 degrees.mp4 | Size: (18.27 MB)
FileName :O 03 - Model structural frame part 1.mp4 | Size: (62.24 MB)
FileName :O 04 - Model structural frame part 2.mp4 | Size: (34.81 MB)
FileName :O 05 - Model structural frame part 3.mp4 | Size: (25.21 MB)
FileName :O 06 - Making corners part 1 - modeling a 90 corner.mp4 | Size: (38.7 MB)
FileName :O 07 - Making corners part 2 - more corners.mp4 | Size: (39.54 MB)
FileName :O 08 - Making corners part 3 - random angled corners.mp4 | Size: (39.44 MB)
FileName :O 09 - Making corners part 4 - procedural corners.mp4 | Size: (96.36 MB)
FileName :O 10 - Making corners part 5 - an angled frame.mp4 | Size: (62.41 MB)
FileName 01 - Model looks different on render.mp4 | Size: (59.08 MB)
FileName 02 - Projected topology is screwed.mp4 | Size: (15.63 MB)
FileName 03 - The file is corrupted.mp4 | Size: (13.45 MB)
FileName :WTH 01 - Everything is cloth.mp4 | Size: (19.5 MB)
FileName :WTH 02 - What the.mp4 | Size: (11.05 MB)
FileName :Ref 01 - Reducing polycount.mp4 | Size: (141.24 MB)
FileName :A 01 - After subdiv model collapses.mp4 | Size: (59.54 MB)
FileName :A 02 - Selecting a loop.mp4 | Size: (10.58 MB)
FileName :A 03 - Supporting loops dont follow my main loop.mp4 | Size: (34.49 MB)
FileName :A 04 - Z-Fighting.mp4 | Size: (19.56 MB)
FileName :A 05 - Seams.mp4 | Size: (23.36 MB)
FileName :A 06 - Wrinkles.mp4 | Size: (31.94 MB)
FileName :A 07 - Should I avoid poles.mp4 | Size: (126.35 MB)
FileName :A 08 - Adding loops to curved surfaces.mp4 | Size: (67.05 MB)
FileName :A 09 - Adding detail in just one place.mp4 | Size: (80.14 MB)
FileName :B 01 - Invisible polygons.mp4 | Size: (15.13 MB)
FileName :B 02 - Faceted look.mp4 | Size: (12.99 MB)
FileName :B 03 - Autosmooth is locked.mp4 | Size: (13.37 MB)
FileName :B 04 - Smooth shading is too smooth.mp4 | Size: (26.34 MB)
FileName :B 05 - Smooth shading is flat.mp4 | Size: (20.2 MB)
FileName :B 06 - Change bevel profile without editing polys.mp4 | Size: (16.79 MB)
FileName :C 01 - Cutting details into curved surfaces.mp4 | Size: (158.44 MB)
FileName :C 02 - Half car half pancake.mp4 | Size: (226.6 MB)
FileName :C 03 - Revert subdivision.mp4 | Size: (49.76 MB)
FileName :C 04 - Im still getting subdivision pinching.mp4 | Size: (298 MB)
FileName :C 05 - Triangular wedge.mp4 | Size: (82.37 MB)
FileName
01 - Icons and patterns.mp4 | Size: (80.29 MB)FileName
02 - Bend high poly cable like a spline.mp4 | Size: (35.2 MB)FileName
03 - Smooth out wires.mp4 | Size: (69.93 MB)FileName :E 01 - Flat ngon surface is glitchy.mp4 | Size: (21.76 MB)
FileName :E 02 - ZBrush doesnt read Blender ngons.mp4 | Size: (29.96 MB)
FileName :E 03 - Model deforms in ugly way.mp4 | Size: (51.1 MB)
FileName :E 04 - My mesh full of ngons.mp4 | Size: (52.48 MB)
FileName :E 05 - All quad doesnt bevel well.mp4 | Size: (50.32 MB)
FileName :F 01 - Do I have to mesh everything.mp4 | Size: (57.08 MB)
FileName :F 02 - Rotary details - mesh level.mp4 | Size: (125.13 MB)
FileName :F 03 - Rotary details - object level.mp4 | Size: (51.06 MB)
FileName :F 04 - Automotive curves arent smooth enough.mp4 | Size: (37.34 MB)
FileName :F 05 - Map highpoly mesh to curved surface.mp4 | Size: (37.65 MB)
FileName :F 06 - Modifiers dont work as expected.mp4 | Size: (46.5 MB)
FileName :F 07 - Deform compound object.mp4 | Size: (27.61 MB)
FileName :F 08 - Make geometry thicker.mp4 | Size: (55.5 MB)
FileName :F 09 - Mirrored mesh intersects itself.mp4 | Size: (35.89 MB)
FileName :F 10 - Mirror slicing plane.mp4 | Size: (14.3 MB)
FileName :G 01 - How to slice panel.mp4 | Size: (54.61 MB)
FileName :G 02 - Boolean non water tight.mp4 | Size: (149.1 MB)
FileName :G 03 - Boolean workflow is inefficient.mp4 | Size: (113.72 MB)
FileName :G 04 - How do you integrate plugs.mp4 | Size: (87.18 MB)
FileName :G 05 - Kitbash object looks out of place.mp4 | Size: (75.24 MB)
FileName :G 06 - High poly boolean makes beveling impossible.mp4 | Size: (49.95 MB)
FileName :G 07 - Subdiv after boolean.mp4 | Size: (51.76 MB)
FileName :G 08 - Model indentation.mp4 | Size: (51.36 MB)
FileName :H 01 - Problem with wide bevels.mp4 | Size: (55.31 MB)
FileName :H 02 - Artifacts after beveling part 1.mp4 | Size: (112.59 MB)
FileName :H 03 - Artifacts after beveling part 2.mp4 | Size: (51.71 MB)
FileName :H 04 - Impossible to bevel.mp4 | Size: (74.56 MB)
FileName :H 05 - Variable radius fillets Blender.mp4 | Size: (103.33 MB)
FileName :I 01 - No1 problem of all time.mp4 | Size: (43.82 MB)
FileName :I 02 - Align faces between objects.mp4 | Size: (50.3 MB)
FileName :J 01 - Object light leak.mp4 | Size: (46.13 MB)
FileName :J 02 - Mesh intersection.mp4 | Size: (39.41 MB)
FileName :K 01 - Straighten an edge.mp4 | Size: (23.13 MB)
FileName :K 02 - Lofting shapes.mp4 | Size: (117.54 MB)
FileName :K 03 - Multi-angled groove.mp4 | Size: (107.86 MB)
FileName :K 04 - Swap the mesh.mp4 | Size: (48.92 MB)
FileName :L 01 - Reducing polycount on a cylinder.mp4 | Size: (61.82 MB)
FileName :L 02 - How to extract piece of mesh.mp4 | Size: (78.33 MB)
FileName :L 03 - Extracting from a subd mesh.mp4 | Size: (152.27 MB)
FileName :L 04 - Meshed text is horrible.mp4 | Size: (43.84 MB)
FileName :L 05 - Optimize a quad mesh without altering curvature.mp4 | Size: (21.93 MB)
FileName :M 01 - Mesh has too many polygons.mp4 | Size: (261.43 MB)
FileName :M 02 - WTH is with my scene.mp4 | Size: (31.33 MB)
FileName :M 03 - Move compound objects with modifiers.mp4 | Size: (43.51 MB)
FileName :N 01 - Exported mesh looks not as intended.mp4 | Size: (89.39 MB)
FileName :O 01 - Model detailed cutouts.mp4 | Size: (46.55 MB)
FileName :O 02 - Rotate topology 45 degrees.mp4 | Size: (18.27 MB)
FileName :O 03 - Model structural frame part 1.mp4 | Size: (62.24 MB)
FileName :O 04 - Model structural frame part 2.mp4 | Size: (34.81 MB)
FileName :O 05 - Model structural frame part 3.mp4 | Size: (25.21 MB)
FileName :O 06 - Making corners part 1 - modeling a 90 corner.mp4 | Size: (38.7 MB)
FileName :O 07 - Making corners part 2 - more corners.mp4 | Size: (39.54 MB)
FileName :O 08 - Making corners part 3 - random angled corners.mp4 | Size: (39.44 MB)
FileName :O 09 - Making corners part 4 - procedural corners.mp4 | Size: (96.36 MB)
FileName :O 10 - Making corners part 5 - an angled frame.mp4 | Size: (62.41 MB)
FileName
01 - Model looks different on render.mp4 | Size: (59.08 MB)FileName
02 - Projected topology is screwed.mp4 | Size: (15.63 MB)FileName
03 - The file is corrupted.mp4 | Size: (13.45 MB)FileName :WTH 01 - Everything is cloth.mp4 | Size: (19.5 MB)
FileName :WTH 02 - What the.mp4 | Size: (11.05 MB)
FileName :Ref 01 - Reducing polycount.mp4 | Size: (141.24 MB)
Screenshot
DDownload
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
